TM 5-2350-262-20-2
4-894.18 Change 3
3
4
REMOVAL
WARNING
Always wear leather gloves when
handlingwireropeassembly.Never
allow wire rope to tun through
hands. Failure to comply may result
in severe injury to personnel.
A Start vehicle engine (TM 5-2350-262-10) and
relieve tension on wire rope.
B Disconnect hook (1) from bracket (2) at rear of
vehicle.
C Place control lever (3) in HIGH. Move and hold
shiftlever(4)toOUT,andpullwireropeassembly
(5) from winch drum.
D Release shift lever (4), and shut off vehicle
engine (TM 5-2350-262-10).
E Remove two screws (6), retainer (7), and wire
rope assembly (8) from winch drum (9).