TM 5-2350-262-10
2-26 Change 6
Table 2-1. Preventive Maintenance Checks and Services for M-9 ACE - Continued
Item
No.
Interval
Location
Item to
Check/
Service
Crewmember
Procedure
Not Mission
Capable if:
b. Check roadwheels for loss of
rubber, pitting, chunking, weather
cracking,and separation of rubber
from metal. Reference:
TM 9-2530-200-24.
22
After
Suspension
System
Continued
NOTE
b. Separation of one inch of
rubber or polyurethane
contact from metal surface
around 75% of roadwheel
and/or chunking that exposes
metal extending 3 x 4 inches
on wheel surface exists.
Weather cracks that exceed
1/4 inch deep and/or extend
completely across treadsurface.
c.Any missing dented, warped,
or damaged roadwheels or
any mounting hole elongated.
d. Track retainer missing or
bent outward more than 3
inches.
c. Check for missing and
damaged roadwheels.
d. Inspect for missing track
retainers. Inspect retainers for rips,
cracks, and retainers rhat bend
outward more than 3 inches
(7.61 cm) at edges. Check for
loose, missing, bent, and broken
hardware.
e. Check inner ware plates and
wear bars on hull for rips,cracks
and gouges; missing and peeling
more than 1/8 inch at edges, and
for hull exposure. Check for loose,
missing, bent and broken
hardware.
e. Track wear plate
missing or peeling
more than 1/8 inch at
edges.
If plate is worn flush with screw
head have unit maintenance
replace wear plate.
