TM 5-2350-262-10
19.1
After
Final Drive
Check both flanges for cracks.
Flange is cracked.
Flanges
20
After
High
Pressure
Filters
Check indicator on high-pressure
Indicatorisout.
filters.
21
After
Exterior
Checkthatheadlights,taillights,
and Interior
blackoutlights,floodlights,and
Vehicle
dome light operate correctly and
Lights
are not damaged.
22
After
Suspension
Start checks at rear side of
System
vehicle.
a. Inspect sprocket teeth for
a. Two teeth broken
damage and wear.
on the same sprocket.
Same tooth broken on
both inner and outer
sprocketonsame
side (left or right).
Two screws securing
inner sprocket to hub
missing or broken.
Any outer carrier to
hub nut missing or
unserviceable.
Sprockettoothworn
into wear indicator.
Change 5 2-25
Item
No.
Interval
Location
Item to
Check/
Service
Crewmember
Procedure
Not Mission
Capable if:
WARNING
Ensure brakes are applied when
checking high-pressure filters.
Failure to comply may result in
severe injury to personnel.
Table 2-1. Preventive Maintenance Checks and Services for M9 ACE - Continued
