TM 9-2350-222-20-1-4
CAPACITOR AND HOUSING ASSEMBLY REPLACEMENT, RIGHT FUEL TANK
(Sheet 8 of 9)
13. Place new gasket (Y) over opening in fuel
tank.
14. Place silicone compound on electrical lead
(z).
15. Place fuel pump close to opening of fuel
tank. Connect electrical lead (Z) to electrical
connector (AA).
16. Place hose (AB) on pump outlet port (AC).
Using flat-tip screwdriver, tighten clamp
(AD) on hose.
17
Swivel access cover (AE) on single installed
screw (AF) to work fuel pump into position in
fuel tank.
Position access cover and gasket on mounting
18.
bracket (AG).
19.
Apply sealing compound to threads of re-
maining four screws (AF). Using 9/16 inch
socket and ratchet, install and tighten all
five screws (AF). Using slip joint pliers,
secure screws with lockwire (AH).
Go on to Sheet 9
TA253357
Change 1 10-409