TM 9-2350-222-20-1-4
CAPACITOR AND HOUSING ASSEMBLY REPAIR (Sheet 1 of 2)
TOOLS: Flat-tip screwdriver
Round nose pliers
SUPPLIES: Lockwasher (MS35335-29) (2 required)
Gasket (7412721)
PRELIMINARY PROCEDURES:
Remove fuel tank capacitor and housing assembly
DISASSEMBLY:
1.
Using screwdriver, remove four screws (A) and
washers (B) holding capacitor and connector
assembly (C) to housing (D).
2.
Separate capacitor and connector assembly (C)
from housing (D).
3.
Remove gasket (E). Throw gasket (E) away,
4.
Using screwdriver, remove screw (F) and flat
lockwasher (G). Throw lockwasher away,
5.
Using pliers, unscrew and remove polarizing
pin (H) and lockwasher (J). Throw lockwasher
away.
6.
Remove receptacle shell (K) and retaining plate
(L) from base plate assembly (M).
7.
Remove retaining plate (L) from receptacle
shell (K).
Go on to Sheet 2
10-411