TM 9-2350-222-20-1-4
STARTER RELAY ASSEMBLY REPLACEMENT (Sheet 2 of 3)
REMOVAL:
1.
Using 7/16 inch socket, remove three screws (A)
and washers (B). Remove cover (C).
2.
Using 3/4 inch socket, remove nut (D) and
remove bus bar (E) from relay (F) stud.
3.
Using 3/4 inch socket, remove nut (G) and
remove bus bar (H) from relay (F) stud.
4.
Using 7/16 inch socket, remove four screws
(J) securing relay (F) to mounting plate.
5.
Remove relay (F) from vehicle.
GO on to Sheet 3
TA139729
10-173