TM 9-2350-222-20-1-4
PROTECTION DEVICE REPLACEMENT (Sheet 2 of 3)
REMOVAL:
CAUTION
Make sure MASTER BATTERY switch is set to OFF before
replacing protection device.
Using spanner wrench, loosen connector (A).
1.
Manually remove connector (A) from master
2.
relay (B).
Using 7/8 inch wrench, loosen connector (C).
3.
Manually remove connector (C) from
4.
protection device (D).
Using 3/4 inch wrench, remove protection device (D) from master relay (B).
5.
TA139726
Go on to Sheet 3
10-170
