TM 9-2350-222-20-1-4
MASTER CONTROL PANEL REPAIR (Sheet 8 of 65)
Engine Fuel Shutoff and Fuel Pump Switch Replacement (Sheet 2 of 3)
Using screwdriver, remove two screws (E) and
5.
Remove guard (G) and switch (D).
6.
INSTALLATION:
1.
Apply silicone compound (Item 32, Appendix D) to two male connectors (circuit 76).
NOTE
Before installing switch (A), make
sure switch (A) is in OFF position.
I f OFF position is not marked
to make sure switch (A) is in OFF
position.
2.
Using fingers, connect two connectors
(circuits 76) (B) and (C) to switch (A).
3.
Place switch (A) and guard (D) in position on
panel.
4.
Using screwdriver, install two screws (E) and
new lockwashers (F).
TA139618
10-62