TM 5-2350-262-20-2
Change 3 4-869.6
SEMI-AUTOMATIC TRACK ADJUSTER ASSEMBLY
REPLACEMENT AND REPAIR (NEW PRODUCTION)
This task covers:
a.
Removal
c. Repair
e.
Installation
b.
Disassembly
d. Assembly
INITIAL SETUP
Tools:
5180-00-177-7033 Tool Kit, General
Mechanics: Automotive
Materials:
Lubricating Oil
Item 26
Appendix D
Caps and Plugs
Item 7
Appendix D
Drycleaning
Item 31
Solvent
Appendix D
Parts :
Machine Plug (1)
5365-01-217-4133
O-Ring (4)
5331-01-090-5695
O-Ring (4)
5331-01-090-2741
O-Ring (2)
5331-00-808-0794
Seal Kit (2)
Seal Kit (4)
Personnel Required:
Construction Equipment Repairer 62B30
Reference:
TM 5-2350-262-20-3
Troubleshooting Reference:
TM 5-2350-262-20-3
Equipment Condition:
Condition
Reference
Description
TM 5-2350-262-10
Right, Center, and
Left Rear Floor
Plates Removed
TM 5-2350-262-20-1
Hydraulic System
Pressure Relieved
General Safety Instructions:
WARNING
•
High pressure is present in the M9
hydraulic system. Do not disconnect any
hydraulic system component unless
hydraulic system pressure has been
relieved. Ensure each of the hydraulic
control levers is moved several times
through all positions, and the hydraulic
tank dipstick is slowly loosened to relieve
pressure. Failure to comply ay result in
sever injury to personnel.
•
Spilled hydraulic oil is very slippery. Use
caution when entering or working in bowl
area. Wipe up any spilled oil immediately.
•
Do not operate ejector when personnel
are in bowl. Do not work in bowl unless
ejector lock is engaged. Failure to comply
may result in severe injury to personnel.
