TM 9-2350-222-34-1
HYDRAULIC RESERVOIR REPLACEMENT (Sheet 4 of 15)
11.
Using 3/4 inch socket with 10 inch extension,
split flanges (AG), hose assembly (AH), and
packing (AJ). Throw packing away.
12.
Using 3/4 inch wrench, remove four
(AK).
13.
Using 3/4 inch socket on screw and 3/4
inch wrench on nut, remove two screws,
four washers, and two nuts (AL).
14.
Using 3/4 inch socket, remove two screws,
lockwashers, and washers (AM).
CAUTION
Place pieces of plywood or
other suitable material over
batteries, cables, tubes, and
other components to prevent
damage
when
positioning
reservoir for removal.
Go on to Sheet 5
TA130830
12-5