REAR DRAIN VALVE REAR INTERMEDIATE CONTROL ROD REPLACEMENT
[Sheet 3 of 3)
Screw jamnut (C) on rod (A) so that original
length of threads can be seen on rod (A).
Using pliers, screw rod (A) in coupling (D).
Using wrench, tighten coupling (D) against jam
nut (C). Hold jamnut (C) with another wrench
Push rear rod (E) toward front of vehicle.
Position rod (E) clevis to lever (F) and install
clevis pin (C).
Using pliers, install new cotter pin (H) into clevis
Connect universal joint to rear intermediate rod
Install turret (TM 9-2350-222-34-2).
Go to Sheet 6