TM 9-2350-222-20-2-3-2
CRADLE REMOVAL PROCEDURE (CONT)
36-9.
Procedure
Step
Soldier A: Using 3/4" wrench and adjustable wrench, remove self-locking nut (1) and
1.
flat washer (2).
and
Soldier B: Using diagonal cutting pliers, remove lockwire from four outer screws (3)
2.
four inner screws (4) (JPG).
Shaft (5) is under spring tension. Be careful when
releasing tension not to damage equipment.
Soldier A: Using breaker bar and 1-1/8" socket, hold tension on shaft (5) during step 4.
3.
Soldier B. Using a 9/16" socket wrench, remove four inner screws (4).
4.
Soldier A: Slowly release tension on shaft (5).
5.
GO TO FRAME 4
Para 36-9 Cont
36-16