CUPOLA COVER REMOVAL PROCEDURE
9/16 in. socket (3/8 in. drive)
TM 9-2350-222-10 for procedures to:
Elevate and depress caliber .50 machine gun
Open and close M36/M36E1 periscope ballistic shield
EQUIPMENT LOCATION INFORMATION:
Driver's Master Control Panel
Driver's master control panel MASTER BATTERY switch set to OFF
Open M36/M36E1 periscope ballistic shield (TM-10).
Using screwdriver, remove clamp (1) from gun mount (2).
Fully elevate gun (TM-10).
Using socket wrench, remove eight locknuts (3) and eight flat washers (4) from studs (5).
Depress gun to horizontal position (TM-10).
Remove five straps (6) from cover (7).
Remove cover (7) from studs (5).
Close M36/M36E1 periscope ballistic shield (TM-10).
END OF TASK
36-2 Change 1