GAS PARTICULATE HEATER REPLACEMENT (Sheet 4 of 5)
Using 1/2 inch wrench to hold four nuts, use another 1/2 inch wrench to install four screws, new
lockwashers, and nuts (E) to hold heater (A) to cover (D).
Position heater (A) and cover (D) in hull.
Using 9/16 inch socket, install three screws and
Matching circuit numbers on four tags, connect
two electrical connectors (G) and (H).
Remove four tags from two electrical connectors (G) and (H).
Install hose (J) onto adapter (C).
Using screwdriver, tighten clamp (K) to hold hose (J) to adapter (C).
Install hose (L) onto adapter (B).