INTAKE GRILLE DOOR NO. 2 (LEFT AND RIGHT) REPLACEMENT (Sheet 1 of 1)
TOOLS: 1-1/8 in. socket with 1/2 in. drive
Lockwashers (MS35338-70) (4 required)
Open Nos. 5, 4, and 3
intake grille doors
1 and 2)
Using socket, remove four screws (A) and
Using second person, lift door (C) with handles
(D) straight up.
Remove door (C) from vehicle.
With two persons using handles (A), lift door (B) above vehicle and slowly lower into place. Make
sure holes in door hinge (B) aline with holes in vehicle.
Using screws (C) and new lockwashers (D), secure doors (B) to vehicle. Use socket to tighten
Close Nos. 3, 4, and 5 intake grille doors (page 16-24, steps 8 and 9).
End of Task