MANIFOLD HEATER FUEL FILTER ELEMENT AND INPUT FUEL LINE REPLACEMENT
(Sheet 5 of 8)
Fuel Filter Replacement (Sheet 5 of 5)
Connect two fuel lines (G) to tee (H). using 7/16 inch wrench, tighten fuel line nuts.
Connect fuel line (J) to adapter (B). Using 1/2 inch and 5/8 inch wrenches, tighten line nut to
10. Connect electrical lead (K) to solenoid valve (D).
11. Operate primer pump (TM 9-2350-222-10) and check for fuel leaks. If leaks are found, tighten
connections as required.
12. Install lower engine access cover (page 16-42).
End of Task