FUEL SHUTOFF HANDLE REPLACEMENT (Sheet 2 of 2)
Position handle extension (A) in handle (B).
Using hammer, tap two new pins (C) into holes
in handle (B) to secure extension (A).
Screw jamnut (A) onto end of cable (B).
Thread handle (C) and extension (D) as an
assembly all the way onto cable (B).
Using 1/2 inch wrench, hold extension (D)
and, using 9/16 inch wrench, on jamnut
(A), tighten jamnut against handle
assembly (C) and (D).
End of Task
Change 1 7-207