AIR CLEANER MANIFOLD AND RELATED PARTS REPLACEMENT (Sheet 3 of 4)
Position bracket (A) to manifold (B).
Using wrench, install screw (C) and new lockwasher (D) to secure manifold (B) to
Apply silicone compound (Item 32, Appendix D)
to inside ends of two new hoses (E).
Slide hoses (E) onto manifold (B).
Install new gasket (F) onto manifold (B).
Position manifold into housing.
With hoses (E) facing up, install two
clamps (G) onto each hose (E).
Rotate maniold (B) until hoses (E)
line up with precleaner tubes (H).
Slide hoses (E) onto precleaner tubes
10. Using socket, install screw (J) and new lockwasher (K) to secure bracket (A) to bottom of
Apply a thin coat of sealing compound (Item 24, Appendix D) to threads of four screws (L).
Using wrench, install four screws (L) and new lockwashers (M) to secure manifold (B) and
gasket (F) to side of housing.
Position clamps (G) on hoses (E) over manifold (B) and precleaned tubes (H). Use screw-
driver and tighten clamps (G).
Go on to Sheet 4