AIR CLEANER MANIFOLD AND RELATED PARTS REPLACEMENT (Sheet 2 of 4)
Using screwdriver, loosen clamps (A)
securing hose (B).
Slide hose (B) back onto elbow (C).
Using screwdriver, loosen four clamps (D)
securing two hoses (E) to manifold (F) and
precleaned tubes (G).
Using wrench, remove four screws (H) and lockwashers (J) securing manifold (F) to side
of housing. Discard lockwashers.
Using socket, remove screw (K) and lockwasher (L) securing bracket (M) to bottom of
housing. Discard lockwasher.
Slide hoses (E) onto manifold (F) until hoses are even with edge of manifold. Turn mani-
fold until both inlet tubes ar facing up. Remove clamps (D).
Remove manifold (F) from housing.
Remove and discard hoses (E) and gasket
(N) from manifold (F).
Using wrench, remove screw (P) and
lockwasher (Q) securing bracket (M) to
Go on to Sheet 3