TM 5-2350-262-20-2
4-860 Change 3
R Lower roadwheel arm (1) and remove hydraulic
jack, chain hoist, and chain from vehicle.
S Start vehicle engine (TM 5-2350-262-10), and
place suspension control lever in SPRUNG
mode. Stop vehicle engine.
T Referring to torque sequence, tighten lock-nuts
(2) to 190 lb-ft (258 N·m).
CAUTION
Place SPRUNG/UNSPRUNG lever
between positions. Failure to comply
may result in damage to actuators.
U Position hydraulic jack under No. 1 roadwheel
arm (3), and raise No. 1 roadwheel arm (3) to
gain clearance for installation of roadwheel.