TM 9-2350-222-20-1-4
PARKING BRAKE CONTROL ASSEMBLY REPLACEMENT (ENGINE COMPARTMENT)
(Sheet 4 of 15)
13. Using 7/16 inch socket, remove eight nuts
or right sides. Throw lockwashers away.
14. Remove cover and gasket (V) on left or
right sides. Throw gasket away.
NOTE
If your vehicle is equipped with
t w o - p i e c e brake control cable,
p e r f o r m steps 14.1 thru 14.4
and go to step 17.
If your vehicle is equipped with
one-piece brake control cable, go
to step 15.
14.1 Using pliers, remove cotter pin (V.1).
14.2 Remove pin (V.2).
14.3 Using 9/16 inch socket, remove two bolts
Throw lockwashers away.
14.4 Remove control assembly (V.4) from bell-
crank and position aside.
15. Using pliers, remove two cotter pins (W).
Throw cotter pins away.
16. Remove two washers (X) and pins (Y).
Go on to Sheet 5
TA253440
Change 1 13-87