PARKING BRAKE CONTROL ASSEMBLY REPLACEMENT (ENGINE COMPARTMENT)
(Sheet 2 of 15)
Except as noted, replacement of left or right control assembly
Using 7/16 inch socket and 7/16 inch wrench, remove screw (A), lockwasher (B), and nut (C).
Throw lockwasher away.
Remove clamp (D) from control assembly.
Using 3/4 inch socket, remove nut (E) and lockwasher (F). Throw lockwasher away.
Remove bracket (G).
Using 3/4 inch socket and extension, remove nut (H) and lockwasher (J). Throw lockwasher away.
Remove clamp (K) from stud and control assembly.
Go on to Sheet 3