TM 9-2350-222-20-1-4
REPLACEMENT
FINAL DRIVE AIR PRESSURE RELIEF VALVE (LEFT AND RIGHT)
(Sheet 1 of 1)
TOOLS: 7/16 in. combination box and open end wrench
SUPPLIES: Rags (Item 65, Appendix D)
Remove transmission shroud (page 9-20)
PRELIMINARY PROCEDURE:
REMOVAL
Using wrench, remove air pressure valve (A) from installation hole (B) in drive housing.
1.
Inspect air pressure valve to insure that vent cap is free to move on the valve. Replace as
2.
required.
INSTALLATION:
Using wrench, install air pressure valve (A) into installation hole (B).
1.
Install transmission shroud (page 9-23).
2.
End of Task
TA140301
12-8