TM 9-2350-222-20-1-4
DRIVER-TO-TURRET INTER PHONE CABLE ASSEMBLY REPLACEMENT (Sheet 3 of 5)
5.
Using spanner wrench, loosen connector (F)
from connector (G).
6.
Manually remove connector (F) from
connector (G).
7.
Using screwdriver, remove four screws (H)
8.
Manually remove connector (G) from bracket (J) by lifting up and pulling out.
NOTE
Four cable straps (K) are reached from under master control
panel and gage indicator panel.
MASTER CONTROL PANEL
9.
Using socket, remove one screw from each of four straps (K).
10. Remove cable assembly (L) from installed position and from vehicle,
Go on to Sheet 4
TA253446
Change 1 10-353