TM 9-2350-222-20-1-4
DRIVER-TO-TURRET INTERPHONE CABLE ASSEMBLY REPLACEMENT (Sheet 2 of 5)
REMOVAL:
NOTE
Traverse turret as required to remove cable assembly.
Using spanner wrench, loosen connector (A)
1.
from slipring.
Manually remove connector (A) from slipring.
2.
Using socket, remove two screws (B) from
3.
brackets (C). Move cable to top of brackets
(c).
4.
Using socket, remove three screws (D). Displace
cable from harness assembly (E).
Go on to Sheet 3
10-352