TM 9-2350-222-20-14
NEUTRAL SHIFT SWITCH ASSEMBLY REPLACEMENT (Sheet 2 of 2)
INSTALLATION:
1.
Apply silicone compound (Item 32,
Appendix D) to two male electrical
connectors (A).
2.
Connect two connectors (A) to connectors
of neutral shift switch (B).
3.
Place neutral shift switch (B) in position
on vehicle.
4.
Using adjustable wrench and
screwdriver, install two screws (C)
5.
Attempt to start engine in all transmission lever positions. Engine should start only in
neutral (N) and park (P) positions. If not, perform adjustment procedure (page 11-22).
6.
Install transmission shroud (page 9-23).
End of Task
TA139824
10-273