OIL HIGH TEMPERATURE SWITCH REPLACEMENT (Sheet 2 of 2)
Place rags under switch.
Pull socket of rubber insulated connector (A)
from switch cap (B).
Using wrench, remove switch (C) from
Lightly coat threads of switch with sealing
compound (Item 20, Appendix D).
Using wrench, install switch (A) into
Push socket of rubber insulated connector (B)
into switch cap (C).
Remove rags from under switch.
Start and run engine. Observe oil temperature indicator for normal oil temperature (TM
Shut down engine (TM 9-2350-222-10).
Install transmission shroud (page 9-23).
End of Task