TM 9-2350-222-20-1-4
HEADLIGHT ADJUSTMENT (Sheet 1 of 2)
TOOLS: 7/16 in. combination box and open end wrench
9/16 in. combination box and open end wrench
50 ft. measurirg tape
SUPPLIES: Chalk (Item 11, Appendix D)
REFERENCE: TM 9-2350-222-10
PRELIMINARY PROCEDURE:
Park vehicle on flat ground 25 feet from flat vertical wall
ADJUSTMENT:
1.
Using measuring tape, locate center of vehicle.
2.
Using chalk (Item 11, Appendix D), draw line
(A) on ground and UP vertical wall (B).
3.
Using measuring tape, measure distance from
ground to center of headlight.
4.
Using chalk, draw line (C) on wall (B) of the
distance found in step 3.
5.
Using measuring tape, measure down 27-1/4
inches from line (C). Using chalk, draw line (D)
on wall (B).
6.
Using measuring tape, measure distance from
center of vehicle to center of clear lens on left
headlight.
7.
Using chalk, draw line (F) that distance found
in step 6 on wall (B).
8.
Perform steps 6 and 7 for right side. Using
chalk, draw line (F) on wall (B).
Go on to Sheet 2
TA139787
10-236