TM 9-2350-222-34-1
BULLDOZER HYDRAULIC CYLINDER RAM REPAIR (Sheet 10 of 11)
1. Connect test arrangement to cylinder as shown
2. Operate hydraulic pump to completely withdraw
piston.
3. Reconnect test arrangement to cylinder as
shown in test setup 2 (below).
4. Operate hydraulic pump to completely extend
piston.
5. Repeat steps 1 thru 4 five times.
6. There shall be no exterior leakage showing on
the outside of the cylinder during cycling.
Go on to Sheet 11
TA130856
12-32