TM 9-2350-222-34-1
HYDRAULIC OIL RESERVOIR REPAIR (Sheet 3 of 6)
TEST:
1.
Place fabricated plate (A) (Fig. 2, Appendix D)
and gasket (B) onto studs (C) provided for oil
reservoir shutoff valve.
2.
Place washer (D), fabricated spacer (E) (Fig. 3,
on each stud (C).
3.
Using 1/2 inch wrench, tighten eight nuts (G) on
studs (C) to hold fabricated plate (A) and gasket
(B) snugly against reservoir.
4.
Install filler cover onto filler hole (H).
Go on to Sheet 4
TA130844
12-19
