TM 9-2350-222-34-1
ENGINE DISCONNECT LEAD ASSEMBLY REPLACEMENT (2D ENGINE) (Sheet 2 of 5)
NOTE
Straps and covers should be left in place by removing
only one screw. If replacement of strap is required,
remove both screws.
3. Using 7/16 inch wrench, remove screw (C),
lockwasher (D), and flat washer (E) from strap (F).
4. Using 7/16 inch wrench, remove screw (G) and
lockwasher (H) (hidden by bulkhead).
5. Remove clamp (J).
6. Using 7/16 inch wrench, remove screw (K),
lockwasher (L), and flat washer (M) from cover
(N).
7. Using 7/16 inch wrench, remove screw (P),
lockwasher (Q), and flat washer (R) from cover
(S).
Go on to Sheet 3
TA130665
5-86
