TM 9-2350-222-262-3-2
36-37. CUPOLA HATCH INSTALLATION PROCEDURE (CONT)
Procedure
Step
Turn cupola 45 to right of turret center line (TM-10).
1.
2.
Soldier A: Lightly coat end of hold-open latch dog with grease (JPG).
Cupola hatch is heavy. Be careful while putting hatch in
place. If you drop it you can get hurt.
Soldiers A and B: Put cupola hatch (1) in place on cupola.
3.
Soldier B: Hold cupola hatch in vertical position during step 5.
4.
Soldier A: Put tube (2) through cupola hatch (1) and mounting brackets (3).
5.
Soldier B: Coat spring leaves (4) with light coat of oil (JPG).
6.
7.
Soldier B: Put spring leaves (4) in one end cap (5).
Soldier B: Slide spring leaves (4) through tube (2).
8.
Soldier B: Put second end cap (5) on other end of spring leaves (4).
9.
Soldier A: Put two end covers (6) over two end caps (5).
10.
11.
Soldier A: Using socket wrench, attach two end covers (6) with eight screws (7) and
Do cupola hatch test (para 36-35).
12.
13.
Do cupola hatch adjustment (para 36-38, frame 1) as necessary.
GO TO FRAME 2
Para 36-37 Cent
36-86
