TM 9-2350-222-20-2-3-2
36-19.
RESISTOR (EARLY MODEL) INSTALLATION PROCEDURE (CONT)
PROCEDURE
1.
Connect electrical connectors (1) and (2) (JPG).
2.
Place ground lug (3) in position at bracket (4) on turret wall.
3.
Insert bolt (5) through clamp (6), lockwasher (7), ground lug (3) and into bracket (4).
4.
Using 7/16 inch combination wrench, tighten bolt (5).
END OF TASK
Para 36-19 Cont
Change 1 36-53
