TM 9-2350-222-20-2-3-2
36-12.
CRADLE ASSEMBLY PROCEDURE
TOOLS: Plastic face hammer
Internal retaining ring pliers
Long round nose pliers
7/16" combination wrench
7/16" socket head screw key (Allen wrench)
7/16" hex head socket (3/8" drive)
Torque wrench (0 to 100 foot-pounds), (3/8" drive)
Feeler gauge
Grease (item 11, App. A)
SUPPLIES:
Cotter pin, MS24665-132
PERSONNEL: One
REFERENCES: JPG for procedures to:
Use feeler gauge
Install cotter pins
Use retaining ring pliers
Lubricate bearings
Use torque wrench
Para 36-12
36-33
