TM 9-2350-222-20-2-3-2
CRADLE REMOVAL PROCEDURE (CONT)
36-9.
Procedure
Step
Using 7/16" wrench, remove two screws (1), two lockwashers (2), and two clamps (3)
1.
that attach electrical harness (4) to cradle (5).
Squeeze quick-disconnect clamp (6) and remove periscope link (7) from periscope.
2.
Using 7/16" wrench, remove self-locking nut (8) and small flat washer (9) from
3.
elevation screw jack mounting screw.
4.
Remove periscope link (7) and large flat washer (10).
GO TO FRAME 2
Para 36-9 Cont
36-13
