TM 9-2350-222-20-2-3-2
M219 MACHINE GUN MOUNT REMOVAL PROCEDURE (CONT)
35-2.
FRAME 1
Step
Procedure
1.
Using 3/4" wrench, remove pivot screw (1) from upper part of mount (2).
NOTE
On some tanks, self-locking nut (3) and setscrew (5) are
one piece. Allen wrench is not used.
2
Using 1/2" wrench and Allen wrench, loosen two self-locking nuts (3), two nuts (4), and
two setscrews ( 5).
3.
Using 3/4" wrench. remove two self-locking bolts (6) and two flat washers (7). Throw
away two self-locking bolts (6).
GO TO FRAME 2
Para 35-2 Cont
35-3