TM 9-2350-222-20-2-3-2
24-6.
SEAT DISASSEMBLY PROCEDURE
TOOLS: Flat tip screwdriver
Putty knife
PERSONNEL: One
REFERENCES: JPG for procedure to remove cotter pins
PRELIMINARY PROCEDURES: Remove seat from backrest (para 24-4)
Step
Procedure
1.
Using screwdriver. remove four screws (1) and four lockwashers (2).
Remove seat support (3) from seat frame, cushion pad and cover (4).
Remove cotter pin (5) from retaining sleeve (6) (JPG).
3.
4.
Remove retaining sleeve (6) from seat frame, cushion pad and cover (4).
NOTE
Rubber pad (7) is cemented to underside of seat
Support (3).
Using putty knife. remove rubber pad (7) from seat support (3).
GO TO FRAME 2
Para 24-6
24-14
