TM 9-2350-222-20-2-3-2
22-5.
LOADER'S SEAT ASSEMBLY PROCEDURE
TOOLS: Round nose pliers
Hammer
3/8" drift pin punch
SUPPLIES: New seat adjusting washers (two)
PERSONNEL: One
FRAME 1
Procedure
Step
Put backrest (1) on seat (2).
1.
Be careful not to let go of spring when doing this task.
Spring is very strong. If suddenly let go, it can snap
forward hard enough to hurt you.
2.
Put spring (3) and spring support (4) on seat support plate (5). Put U-shaped (6) part of
spring (3) against back of seat support plate.
Put pin (7) through bracket (8), washer (9), and mounting plate (10) and into spring
3.
support (4).
Press down on spring (3). Line up spring support (4) with mounting plate (11). washer
4.
(12) and bracket (13).
Using hammer and punch, tap pin (7) through mounting plate (11), washer (12), and
5.
bracket (13).
GO TO FRAME 2
Para 22-5
22-8
