TM 9-2350-222-20-1-5
G E N E R A L MAINTENANCE - Continued
Removal of Studs Broken at Surface
NOTE
After being drilled, studs broken
at a surface may be removed
either by using a spiral tapered
screw extractor or a fluted type
I f a spiral tapered
extractor.
s c r e w extractor is used, go to
If
a
fluted
type
step 6.
extractor is used, go to step 9.
6.
Using tap wrench handle (C) with screw
extractor (D), turn tap wrench handle (C)
counterclockwise to screw extractor (D) into
stud (B).
Keep turning extractor counterclockwise
7.
until stud (B) is removed from threaded
hole (E).
8.
Using clean rag, wipe out threaded hole (E)
and surface (F).
TA140830
C-12