TM 9-2350-222-20-1-5
BULLDOZER ACTUATING CYLINDER TUBE REPLACEMENT (Sheet 2 of 5)
REMOVAL:
NOTE
This procedure is for right cylinder tubes only. See page 18-47
(steps 15 thru 20) for left cylinder tubes.
NOTE
Removal procedures for upper and lower
tubes are identical.
1.
Using 1-5/8 inch wrench to hold elbow (A) in
position, use 1-1/2 inch wrench to remove nut
(B) from elbow.
2.
Using 9/16 inch socket, remove screws and
Go on to Sheet 3
18-35