TM9-2350-222-20-1-4
SHIFTING CONTROL AND RELATED PARTS REPAIR AND REPLACEMENT
(Sheet 1 of 15)
PROCEDURE INDEX
PROCEDURE
PAGE
--
Removal
Disassembly
Inspection
Assembly
Installation
TOOLS:
7/16 in. combination box and open end wrench
9/16 in. combination box and open end wrench
3/4 in. combination box and open end wrench
7/16 in. socket with 1/2 in. drive
Ratchet with 1/2 in. drive
Torque wrench with 1/2 in. drive (0-175 lb-ft) (0-237 N.m)
9/16 in. socket with 1/2 in. drive
10 in. extension with 1/2 in. drive
2 lb hammer
1/8 in. drive punch
3/8 in. drive punch
1/4 in. drive punch
3/4 in. brass drift
Slip joint pliers
Flat-tip screwdriver
Vise
6 in. machinist's rule
1/4 in. electric drill
5/64 in. drill bit
1/8 in. drill bit
Alining punch
PRELIMINARY PROCEDURE: Block tracks (TM 9-2350-222-10)
Go on to Sheet 2
TA253379
Change 1 11-25
