TM 9-2350-222-20-1-4
LEFT TAILLIGHT - STOPLIGHT ASSEMBLY REPAIR (Sheet 3 of 3)
ASSEMBLY:
1.
Insert three leads (A) through body assembly (B).
2.
Install socket and wiring assembly (C) by pressing in grommet (D),
3.
Using Phillips screwdriver, install three screws (E) through plate (F) and grommet (D)
4. Using Phillips screwdriver, install two screws (G) and new lockwashers (H).
5.
Install three lamps (J) and (K).
6.
Coat preformed packing gasket (L) with silicone
compound (Item 32, Appendix D) before
installation.
7.
Place new preformed packing (L) on door
assembly (M).
NOTE
Wires are located at bottom of
housing (B) for positioning of door
assembly (M).
8.
Using flat-tip screwdriver, install six screws
(N), door assembly (M) and six retaining rings
(P) on body assembly (B).
Install lamp assembly (page 10-231).
9.
10.
Check taillight operation (TM 9-2350-222-10).
TA140530
End of Task
10-234
