TM 9-2350-222-20-1-4
INSTRUMENT PANEL CLUSTER ASSEMBLY REPAIR (Sheet 7 of 22)
Gage Illumination Indicator Light Replacement (Sheet 1 of 2)
TOOLS: Flat-tip screwdriver
SUPPLIES: Silicone compound (Item 32, Appendix D)
Preformed packing (7358626)
Lockwasher (MS35338-57)
Remove instrument panel from vehicle (page 10-123)
PRELIMINARY PROCEDURE:
REMOVAL:
Remove lead (circuit 40) from rear of indicator light (A) by pulling out.
1.
2.
Remove lens (B) by turning counterclockwise
3.
Remove lamp (C) by pushing in and turning counterclockwise.
4.
Using screwdriver, remove two screws (D) and
lockwashers (E) securing indicator light (A) to
panel. Throw lockwashers away.
Remove indicator light (A).
5.
Remove preformed packing (F) from lens (B).
6.
Throw preformed packing away.
Go on to Sheet 2
TA139690
10-134
