TM 9-2350-222-20-1-4
GENRATOR REPLACEMENT (Sheet 2 of 15)
REMOVAL:
1.
Using screwdriver, loosen screw (A).
2.
Slide clamp (B) onto generator duct (C).
3.
Remove flexible connector (D) from generator duct (C).
4.
Remove clamp (B).
5.
Using 1/2 inch wrench, remove two screws, lockwashers, and flat washers (E) securing generator
duct (C) to engine. Throw lockwashers away.
6.
Remove generator duct (C) from generator (F).
GO on to Sheet 3
TA139560
10-5
