TM
9-2350-20-1-3
MANIFOLD HEATER (LEFT AND RIGHT) REPLACEMENT (Shoot 4 of 4)
4.
Position new gasket (D) and manifold heater
(E) onto manifold.
5.
Install four washers and new nuts (F) to
secure manifold heater.
6.
Using 1/2 inch wrench, tighten nuts (F).
NOTE
Adjust elbows to aline with fuel
tub. connectors.
Connect fuel input tube (H) to elbow. Using 7/16 inch wrench, tighten tube.
7.
8.
Connect fuel return tube (G) to elbow. Using 9/16 inch wrench, tighten tube.
9.
Connect ignition lead (J) to spark plug. Using 3/4 inch wrench, tighten ignition lead.
10. Perform manifold heater operational check (page 7-363).
11. Install 2A powerplant (page 6-14) or 2D powerplant (page 6-37).
End of Task
TA148931
7-368
