TM9-2360-222-20-1-3
PRIMARY FUEL FILTER ELEMENT REPLACEMENT (2D ENGINE) (Sheet 5 of 5)
8.
Using another person, set FUEL PUMPS switch
(L) on master control panel at driver's station
to ON.
set MASTER BATTERY switch (M) to on and
9.
observe air release (bubbles) from bleed cap (K).
10. Set MASTER BATTERY switch (M) to OFF and, after about 1 minute, repeat step 9.
11. Repeat steps 9 and 10 until a steady flow of
fuel comes out of bleed cap (K), then close bleed
cap (K) and set MASTER BATTERY switch to
OFF.
12. Using adjustable wrench, tighten bleed cap (K) enough so it cannot be opened with the fingers.
13. Close front left intake grille door (TM 9-2350-222-10).
End of Task
TA148915
7-336
