TM 9-2350-222-20-1-3
DRAINING FUEL TANK AND REMOVING CONDENSATE (Sheet 6 of 7)
4.
Operate pump handle (E) several times to drain
any fuel left in hoses (D) and (F) and hand fuel
pump (G).
5.
Remove discharge hose (F) from M-gallon drum
(H), and let hose hang over side of vehicle.
Using fingers in clamp rings (J), pull clamps
(K) out and down to loosen discharge
connector (L).
7.
Remove discharge hose (E) from pump
discharge connector (L).
8.
Repeat steps 6 and 7 for removal of suction
hose.
9.
Install dust cover (M) on discharge connector
(L).
10.
Using fingers in clamp rings (J), pull clamps (K)
out and up against dust cover (M) to clamp dust
cover in place.
11.
Repeat steps 9 and 10 for installing dust cover
on hand fuel pump suction connector and hoses.
Go on to Sheet 7
TA141417
7-157
