TM 9-2350-222-20-1-3
CRANKCASE BREATHER TEE AND REAR TUBE REPLACEMENT (Sheet 4 of 6)
INSTALLATION:
10
Install new hose (A) on breather tube (B). Place
two clamps (C) on hose (A).
2.
Connect breather tee (D) to hose (A).
3.
Install breather tee (D) with two new gaskets
(E) and spacer (F) to engine, using two screws
4.
Using screwdriver, tighten two clamps (C).
5.
Using wrench, tighten two screws (G).
Go on to Sheet 5
TA249059
6-74.1
Change 2