TM 9-2350-222-20- 1-3
2A ENGINE AND 2D ENGINE POWERPLANT TESTS (GROUND HOP) (Sheet 9 of 15)
Make sure levels are up to full
8.
Check oil levels in engine and transmission (LO 9-2350-222-12).
range on level gages.
WARNING
Take all necessary safety precautions to eliminate possible
injury to personnel or damage to equipment. Stand clear of
transmission output flanges whenever engine is running.
9.
Start and operate engine until normal operating temperatures are reached (TM 9-2350- 222-10).
NOTE
An indicator on the linkage shaft and four dots on the body
transmission valve casting indicate shift position.
10. Set transmission in high range by grasping shift lever and pull or push lever to set indicator to
high range.
Go on to Sheet 10
TA130286
5-56
