TM 5-2350-262-20-2
4-594 Change 3
17
19
21
23
22
24
16
22
23
24
21
17
20
19
18
D Connect heater hose (1) to elbow (2). Align arrows
on quick-disconnect (3), and connect heater hose
(1) at quick-disconnect (3).
E Connect RH OIL CLR-2C hose (4) to elbow (5).
F Connect two OIL COOLER hoses (6) to elbows
(7).
G Connect LH OIL CLR-3C hose (8) to elbow (9).
H Connect LH OIL CLR-1 hose (10) to elbow (11).
I
Connect oil cooler bypass tube (12) to water pump
(13) with hose (14) and two clamps (15).
J Install two hoses (16) and four clamps (17) on oil
cooler (18). Do not tighten clamps (17).
K Install two gaskets (20) and coolant tubes (21) on
cylinder heads (19) and hoses (16) with eight
washers (22), lockwashers (23), and screws (24).
Tighten clamps (17). Tighten screws (24) to 20-23
lb-ft (27-31 N·m).
13
12
15
14
20
